Save 10%

Velocite Flux Carbon 26' Deore XC MTB

List price: $1,819.00  


You save: $181.90 (10%)
In stock

In the photographs above, custom Flux X0 with FSA XC-300 wheels. The actual bike may vary from the photographs.

Velocite Flux full carbon mountain bike frame was developed to deliver the best off road performance when the terrain gets technical, or fast. It is not a frame for showing off to friends, for keeping indoors, or for riding on paved roads. The Flux is a thoroughbred carbon fiber frame intended for trail domination and winning.

Key Features

  • Monocoque unidirectional (UD) high modulus blend carbon fiber composite
  • Asymmetric, tapered head tube 1 1/8” top, 1.5” bottom
  • Full length carbon BB30 shell and bottom bracket
  • Carbon fiber head tube angular contact headset races
  • Internal shift cable routing
  • Carbon dropouts
  • Bow shape for minimal front triangle size, low standover height and maximum stiffness
  • Sloping geometry
  • 1050-1200g

Headset, TLCS31 seatpost, Velocite Anchor clamp are included

It is not an ultralight frame. It does not aim to look impressive just on paper, or to be used for bragging rights. Nevertheless, the weight of just 1.2kg for size M (19") is perfectly reasonable.

While there are lighter frames, none are stiffer or more durable than the Velocite Flux. We can confidently stake this claim since we used the best available materials, and the best available construction methods, and we avoided making an ultra light frame on purpose. To make the Velocite Flux any lighter, we would have had to reduce the number of carbon fiber layers since there are no further technological improvements possible. Removing the layers may be acceptable with some road bike frames, but we deemed this completely counter productive for a true racing mountain bike frame.

A stiff frame allows you to remain in much greater control when the terrain gets technical, or when you are trying to go as fast as possible. It allows you to maintain your line without loss of control. A flexible frame deflects sideways and around the obstacle, or the point of impact instead of going where you are pointing it. When navigating challenging drops, or rocky and rooty sections, you will have a lot more confidence on the Velocite Flux than on a lesser frame. Similarly, on fast flowing trails where you will reach speeds at which you need to maintain focus, a stiff frame will allow you to precisely guide it along the fastest line, with minimal guesswork and anxiety.

The increased stiffness maintains its performance lead when going up hill as well due to increased power transfer and better rear wheel traction since you will not be deflected sideways every power stroke.  

Flux in use


Rock Shox 30 Silver
Truvativ Stylo T10 680/20
Velocite 1 1/8 -1,5" TiN
Prologo Kappa Pas
Truativ Stylo T20
Velocite Anchor
Truativ Stylo T20
Shimano MT15
Shimano Deore
Shimano Deore
Shimano Deore
Shimano Deore 3 x 10
Shimano Deore
Shimano Deore
Shimano Deore


From 10.1 kg

No posts found


Free shipping on all orders over US$900!

Who is Velocite? Find out more about what we do.
Click here to find out more

OS headtube

Our frames take advantage of a tapered head tube with a 1.5" bottom bearing and 1 1/8" top bearing. This is the optimal configuration to achieve the best torsional stiffness at a low weight. The oversize head tube allows larger diameter down tube to be used, while the fork also benefits from the larger fork crown which distributes the stresses over a wider area.

Torsion focus

All Velocite frames lead their product class in terms of torsional stifness as measured at the head tube and the bottom bracket (also known as pedalling stiffness). High torsional stiffness increases the efficiency and handling characteristic of the bike without adversy affecting rider comfort. Specifically, the exceptionally high pedalling stiffness results in immediate response to your every stroke, and instant acceleration.

HC Tech

High compaction technology (HCT) is a carbon fiber composite manufacturing method that allows us to achieve smooth, wrinkle and debris free interior surfaces, as well as perfect outside surface quality which is not wavy or of uneven thickness. The benefits are not only cosmetic. HCT composites have less voids and thus higher inter-laminar strength which increases frame durability and stiffness.

UD Monocoque

We prioritize the use of unidirectional carbon fiber wherever possible in order to achieve the highest strength and stiffness for any given weight. Likewise the monocoque process where there are no physical joints at all throughout most of the frame enables us to utilize optimal continuous fiber layups to achieve our extraordinary performance.


comments powered by Disqus